Three VFFS series for pillow, gusset, chain and quad-seal bags: the SVC260 for continuous high-speed bagging, the compact VP Series and the VGT for quad-seal bags. Each is matched to a weigher or filler and tested with your product.
From left: SVC260, VGT Series, VP Series.
A VFFS machine, also called a vertical packaging machine, makes the bag from a roll of flat film, fills it from above and seals it, in one continuous vertical path.
Film is pulled off the roll and kept in register by a photo eye reading the print marks.
The forming shoulder wraps the flat film around a vertical tube.
A vertical seal joins the film edges into a tube. Quad-seal bags get four corner seals instead.
A weigher or filler above the tube drops one dose down into the bag.
Horizontal jaws seal the top of this bag and the bottom of the next, then cut between them.
The finished bag drops onto a conveyor for checkweighing and case packing.
In continuous motion the film never stops and the jaws travel down with it, which allows higher speeds. In intermittent motion the film stops for each cross seal, which suits many products and bag sizes at moderate speeds.
They differ in bag style, speed and how the dose is delivered.
Our fastest bagger, for lines where output is the limit. Six servo axes keep film and jaws moving together, and it is our only bagger available up to IP69 for washdown areas. Pillow bags as standard, side gusset bags with the gusset assembly, on laminate, foil or paper-based film.
View SVC260Three sizes for film from 90 to 520 mm wide, making pillow and chain bags. The VP takes any of four dosers, including an auger filler for powders. The VP-YT carries its own multihead weigher for 5–1,000 g packs.
View VP SeriesBuilt only for quad-seal bags, with or without a back seal. A separate edge-sealing unit makes the four corner seals. Valve, zipper and gas flush are available as options.
View VGT Series*Machine references. Actual output depends on product, fill weight, bag size and film.
We are the manufacturer: all three series are designed and built in our own factory in Shijiazhuang, China. See the factory
Reference data from each machine page. The final setup follows your product and bag.
Swipe the table to compare.
| SVC260 | VP Series | VGT Series | |
|---|---|---|---|
| Bag styles | Pillow; side gusset optional | Pillow, chain bags | Quad-seal, with or without back seal |
| Max. speed* | 160 bags/min | 90 bags/min (VP-YT 80) | 80 bags/min |
| Bag width | Up to 260 mm | 35–250 mm, by model | Front panel 70–300 mm, gusset 30–100 mm |
| Bag length | Up to 400 mm | 50–400 mm, by model | 100–400 mm |
| Film | 0.04–0.10 mm | 90–520 mm wide, by model | 0.04–0.10 mm |
| Dosing | Multihead weigher or other dosing | Multihead, linear, cup or auger; VP-YT built-in | Multihead weigher or auger filler |
| Protection rating | IP65, IP66 or IP69 on request | Up to IP65 | Up to IP65 |
| Typical products | Frozen foods, snacks, nuts, grains, pet food | Same, plus powders | Coffee, snacks, nuts, grains, milk powders |
*Machine references. Actual output depends on product, fill weight, bag size and film.
Start from the bag you want on the shelf, then the output and the product. Pick the row closest to your project.
Start With Your ProductThe bagger is rarely the only limit. Output, weight and seal quality depend on the whole line and on your product and film.
How the Packaging Test WorksWeigher, cup or auger filler: it must deliver enough accurate doses per minute
Longer bags and heavier fills take longer to drop and settle
Structure, thickness and slip decide sealing time and how the film tracks
Dust, oil, ice or crumbs in the seal area slow the jaws or cause leaks
Valves, zippers, gas flush and coders each add steps to the cycle
Checkweighers and case packers have to keep up with the bag rate
Comparisons and buying questions, answered in more detail.
A vertical form fill seal machine makes bags from a roll of film, fills them from above and seals them. The film is formed around a vertical tube, sealed along its length, filled by a weigher or filler, then sealed and cut across. It suits granular, piece and powder products.
Pillow bags on the SVC260 and VP Series, side gusset bags on the SVC260 with the gusset assembly, chain bags on the VP Series, and quad-seal bags, with or without a back seal, on the VGT Series.
In continuous motion the film keeps moving and the sealing jaws travel with it, so the machine never stops between bags. In intermittent motion the film stops for each cross seal. The SVC260 is continuous-motion only. The VP Series comes in intermittent- and continuous-motion versions; choose based on your product and target output. The VGT can run in continuous or intermittent motion.
Up to 160 bags/min on the SVC260, 20–90 on the VP Series and up to 80 on the VGT. These are machine references. The output you get depends on the product, fill weight, bag size, film and dosing, so we confirm it in a packaging test.
It depends on the product. Multihead or linear weighers suit granular and piece products, cup fillers suit free-flowing products dosed by volume, and auger fillers suit powders. The VP-YT has a multihead weigher built on.
Yes. The packaging test is free; you cover the shipping of your samples. We run your product and film on the machine and send you a test video and a written record.
Send your product, bag style and size, fill weight and target output. We will recommend the VFFS series and the doser, and plan the test.
We reply within 1 working day.
Quick enquiry
By sending, you agree to our Privacy Policy.
