Standard PBCPendulum Bucket Conveyor
A Z-type bucket elevator with one continuous bucket path for horizontal conveying and vertical lift. For grains, rice, nuts, snacks, pet food and other free-flowing products.
10–20m³/h*
throughput25m
max. lift heightZ / C
layouts4 / 6L
bucket volume
*Volume per hour. Actual kg/h depends on product bulk density, layout and operating conditions.
Products
Free-flowing granular and small-piece products.
Also suitable for
- Tea
- Spices & seasonings
- Pasta
- Dried vegetables
- Puffed cereals
- Chocolate pieces
- Pharmaceutical & chemical granules
Not suitable for liquids or slurries. Fragile products are tested before you order.
One Bucket, Infeed to Discharge
The horizontal run, the corner and the vertical lift run on one chain loop with a single drive.
- 01
Loaded Once
Product is fed into the bucket at floor level and stays there until discharge.
- 02
Carried Level
Pivots between two chains keep the bucket flat along the floor, round the corner and up the lift.
- 03
Tipped Out Whole
At discharge the bucket turns fully over and empties itself.
- 04
One Drive
A single motor runs the horizontal run, the lift and the discharge.
The Bucket Path
Easy to Clean
Built for lines that change product several times a day.
- Buckets lift out without tools
- Service doors open without tools
- Catch tray under the tail as standard
- Chain runs without lubrication
- Buckets turn fully over and empty at discharge
- Food-grade contact materials, test reports on request
Send Us Four Numbers
We send back a layout and a quote.
- AInfeed height above floor
- BDischarge height above floor
- CHorizontal run at the infeed
- DHorizontal run at the discharge
Z-type and C-type layouts. Infeed and discharge are built to your drawing.
Send Your LayoutSwipe the table to see all models.
| Model | PBC-Z4L-S | PBC-Z6L-S | PBC-C4L-S | PBC-C6L-S |
|---|---|---|---|---|
| Layout | Z-type | Z-type | C-type | C-type |
| Throughput* | 10–15 m³/h | 15–20 m³/h | 10–15 m³/h | 15–20 m³/h |
| Max. lift height | 25 m | 25 m | 25 m | 25 m |
| Drive power** | 1.1–4 kW | 1.1–4 kW | 1.1–4 kW | 1.1–4 kW |
| Bucket material | ABS / PE / PP / 304 SS | ABS / PE / PP / 304 SS | ABS / PE / PP / 304 SS | ABS / PE / PP / 304 SS |
*Volume per hour. **Drive power depends on the lift height and line duty, and is confirmed with the layout drawing.
All Models
- Bucket volume
- 4 or 6 L
- Voltage
- Built for your region
- Sensors
- Stall, backstop and product sensors
- Delivery
- Shipped in sections, ready to lift in
- Lead time
- 30 days, ex-works
- Warranty
- 3 years on core components
- Manuals
- English
Drive & Controls
- Schneider switches
- Inovance VFD
- GUOMAO geared motor
Part of a Complete Line
The conveyor is sized to the weigher and packaging machine it feeds.
- 01
Product Source
Silo, bin or buffer
- 02
Standard PBC
Horizontal run and vertical lift
- 03
Weighing / Dosing
Multihead or linear weigher
- 04
Packaging Machine
Bagger or pouch filler
- 05
Secondary Packaging
Case packing and palletizing
Size It to Your Product
10–20 m³/h is a volume. Your kg/h depends on the product's bulk density, so we size the conveyor from your product and the packing rate downstream.
What to send us
- Product and its bulk density
- Required kg/h or packs per hour
- Infeed and discharge heights (A, B)
- Horizontal runs (C, D)
- Weigher or packaging machine it feeds
- Cleaning or changeover needs
Fragile products are tested before you order.
Warranty
12 months on the machine and 3 years on core components.
What products can it handle?
Grains and cereals, rice, seeds and pulses, nuts and dried fruit, salt and sugar, snacks and confectionery, feed and pet food, coffee and cocoa, and plastic granules. It is not suitable for liquids or slurries.
What is the throughput?
10–20 m³/h, depending on the model. This is a volume. Your kg/h is the m³/h multiplied by your product's bulk density.
How high can it lift?
Up to 25 m.
Which layouts are available?
Z-type and C-type. Infeed and discharge are built to your drawing.
Does it reduce product breakage?
It is designed to reduce transfers: product is loaded once and discharged once, with no chutes in between. Breakage depends on the product, so we test fragile products first.
How is it delivered?
Shipped in sections, ready to lift in, with English manuals. Lead time is 30 days ex-works.
What is the difference between the Hygienic and Standard versions?
Both work the same way. The Hygienic version uses ABB electrics and an SEW geared motor. The Standard version uses Schneider switches, an Inovance VFD and a GUOMAO geared motor. Choose by your product, cleaning needs and line standards.
Is a pendulum bucket conveyor the same as a Z-type bucket elevator?
Yes. Pendulum bucket conveyors are often called Z-type bucket elevators, after the Z-shaped bucket path of the Z-type layout. Ours are also built in a C-type layout.
Tell Us Your Product
Send your product, required output and four layout dimensions. We will send back a layout and a quote.
- 01Product
- 02Output
- 03Heights A, B
- 04Runs C, D
We reply within 1 working day.
Quick enquiry
You're enquiring about
Standard Pendulum Bucket Conveyor
Product handling equipment
We'll include this equipment in your enquiry automatically.
We use these details to reply to your enquiry. Read our Privacy Policy.